How to Install LED Strips on Slatted Acoustic Panels

Installing slatted acoustic panels with LED lights can be a stylish and functional addition to your space. Here’s a general guide on how to install them:

I. Prepare Materials and Tools

To install LED strips, you’ll need to prepare the following materials and tools:

1. LED light strip;
2. Power supply;
3. Controller;
4. Ruler;
5. Pencil or marker pen;
6. Electric drill;
7. Wood drill bit;
8. Cable ties;
9. Scissors;
10. Insulating tape, etc.

II. Installation Steps

1. Measure Dimensions: Start by using a ruler to measure the length and width of the wooden grille, marking the positions where the LED strips will be installed.
2. Install LED Strips: Based on the measured positions, install the LED strips. Use cable ties to secure the LED strips in the grooves of the wooden grille. For longer strips, it’s recommended to secure them at multiple points to avoid loosening or falling issues.
3. Drill Holes: To install the power supply and controller, drill holes in the wooden grille. Use an electric drill and wood drill bit, selecting an appropriate size for the holes. Before drilling, you can apply some insulating tape around the hole to prevent cracks and leakage.
4. Secure Power Supply and Controller: Mount the power supply and controller in the drilled holes and secure them with screws. During installation, pay attention to the wiring of the power supply and controller. If unfamiliar, it’s advisable to seek professional installation.
5. Test Lighting Effects: After completing the installation of the LED strips, test whether the lighting effects are functioning properly. If any issues arise, recheck the installation and troubleshoot as needed.

   

Method 2: Creating a Beautiful Wall with Slatted Acoustic and Concealed Lighting

1. Measure Dimensions: Start by using a ruler to measure the length and width of the wooden grille, marking the positions where the LED strips will be installed.
2. Install LED Strips: According to the measured positions, insert the LED strips into the grooves of the trim with light line slots, secure them with self-tapping screws, and finally attach the grille panel.
3. Drill Holes: To install the power supply and controller, drill holes in the wooden grille. Use an electric drill and wood drill bit, selecting an appropriate size for the holes. Before drilling, you can apply some insulating tape around the hole to prevent cracks and leakage.
4. Secure Power Supply and Controller: Mount the power supply and controller in the drilled holes and secure them with screws. During installation, pay attention to the wiring of the power supply and controller. If unfamiliar, it’s advisable to seek professional installation.
5. Test Lighting Effects: After completing the installation of the LED strips, test whether the lighting effects are functioning properly. If any issues arise, recheck the installation and troubleshoot as needed.